Showing posts with label industrial. Show all posts
Showing posts with label industrial. Show all posts

Friday, 20 July 2018

Industrial Cleaning - Black Fluid P


There are many different items that will need cleaning in an industrial environment and sometimes the industrial cleaning chemicals used will need to also mask bad smells. If you need to clean drains or big black bins or any other area that regularly has an odour problem then there is sure to be something in the Blendwell Chemicals range you can use.

I would recommend that you use Black Fluid P. This industrial cleaningchemical had disinfecting properties to help destroy the cause of any odours. It also has a really strong phenolic smell to mask any odours that might remain after cleaning. This cleaning chemical can be diluted with water before use and can be applied in many different ways depending on what you need to clean. The items being cleaning should be rinsed thoroughly after use.

For more information on industrial cleaning chemicals that are manufactured by Blendwell Chemicals contact us.
The Blendwell Chemicals factory is in Midrand, South Africa and we are your local industrial cleaning chemical supplier!

Thursday, 25 October 2012

How to clean your kitchen countertops and be eco-friendly


Whether it’s your kitchen at home or your industrial kitchen where you and your staff prepare a gazillion dishes a day, you need to keep your work surfaces clean. Counter tops can get messy really fast and need consistent and regular cleaning not only to keep your food hygienic but to keep your kitchen safe.

Blendwell Cleaning Solutions manufactures the Delphis Eco range of green cleaning products under license to the UK. In this range is the Delphis Eco Multi Purpose Cleaner. This green cleaning chemical carries the EU Ecolabel (also known as The Flower) and is truly a spectacular cleaning product. It also carries the SABS 1828 mark. Multi Purpose Cleaner is an all-in-one industrial strength cleaner that is able to remove grease, fats, grime and soils from almost any washable surface. It can be used on plastic, vinyl, marble, granite, chrome, stainless steel and quartz countertops without leaving any streaks. For a household kitchen you would need to use this cleaning product at a dilution of one part product to 50 parts water – so you use very little. For a food factory or industrial kitchen you may need to increase this dilution but it will all depend on what you are preparing.  On top of all of this, this cleaning product is environmentally friendly too!

Delphis Eco Multi Purpose Cleaner is a fantastic eco-friendly cleaning product to use in your kitchen. For more information on the green cleaning products manufactured in South Africa by Blendwell Cleaning Solutions please visit www.blendwell.co.za/Green_Cleaning_Products.  We are your best local cleaning products manufacturer!

Friday, 19 October 2012

What is the dirtiest place in your kitchen?


Most kitchens have one place that is regularly ignored and can suffer from a fair amount of grease build up. Add dust and dead moths to this mix and it can become rather disgusting. It’s your kitchen lights of course! Especially in homes where the fashion is now to have beautiful chandelier type lights in the kitchen. When last did you take a closer look at your lights?

The most effective way of dealing with your lights and light fittings is to first remove all dead bugs that may have gathered in the fittings. If there are glass and plastic parts that you can remove, do so.  These light covers can then be washed. Run a sink full of warm water and put a squirt of dishwashing liquid in the sink. You can use a cleaning product like Blendwell Cleaning Solutions Greendet. This cleaning product has good grease cutting power and will be able to clean these covers in no time. All other parts should be wiped down. Obviously, do not allow yourself to be exposed to any electrical cords and do not allow any damp cloths near electricity. Replace the covers and stand back and enjoy your truly clean kitchen.

Blendwell Cleaning Solutions has a large amount of cleaning products for home, office and industrial cleaning. For more information please visit www.blendwell.co.za. Our factory is in Midrand, South Africa. We are your best local cleaning chemical manufacturer.

Thursday, 18 October 2012

How to clean small machine parts using a hot soak tank cleaner


Hot soak tank cleaners are not as expensive to but as cold soak tank cleaners but they do require heating. This heating of the cleaning product require time and electricity which can cost you in the long run. It may be easier for you as storage of these cleaning products is not as complicated as cold soak tank cleaners.

If you have decided that a hot soak tank cleaner is the way to go and you have small engine parts to clean you could use a product like Bupi Cleaner. For small parts, simply mix the powder at the right ratio to water and heat up to 80 degrees Celsius. Once your solution has reached the required temperature, put the parts into the dip basket and gently lower the basket into the heated cleaning chemical. Leave for two hours. Remove and rinse thoroughly.

For larger engine parts, this cleaning product can also be used to spray on the items to be cleaned. This industrial cleaning product works well with most metals and has been designed to be gentler than some of our other soak tank cleaners.

For more information on industrial cleaning chemicals please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals. Blendwell Cleaning Supplies has all the industrial cleaning chemicals you will need. Our products are manufactured in our factory in Halfway house, South Africa. We are your best local cleaning chemical manufacturer!

How to clean small machine parts


Cleaning machine parts requires specialised cleaning chemicals. Machine parts are usually covered with a huge amount of grease which can be really difficult to get rid of. This is the ideal time to use one of Blendwell Cleaning Solutions cleaning chemicals. Blendwell Cleaning Solutions manufacture a large range of industrial cleaning products.

Small machine parts require a cleaning product like Turbo 55. This powerful solvent-based soak tank cleaner has been designed to clean carburettors, diesel pumps and other car and diesel parts. This industrial cleaning product is ideal for removal of epoxy, enamels and leaves carbon in a soft state for easy removal. The industrial cleaning chemical will need to have the machine parts dipped for 30 to 60 minutes. After dipping, it will be necessary to rinse thoroughly with water before working on it.

Blendwell Cleaning Solutions is the best place to get all your cleaning chemicals. You’ll be able to find a great selection of industrial cleaning products and you can get more information at www.blendwell.co.za/Industrial_Cleaning_Chemicals. Your best local cleaning chemical manufacturer is in Midrand, South Africa. 

Tuesday, 16 October 2012

How to clean machine parts - cold soak tank cleaners


If you have decided to clean using a cold method of soak tank cleaner then you have opted to use a solvent based cleaning product in your workshop. Blendwell Cleaning Solutions manufactures a couple of different types of soak tank cleaners and Black Turbo was created to work as a cold soak tank cleaner.

Because this industrial cleaning product is mostly made from solvents it can easily evaporate. We have made ours with a water seal to help prevent evaporation. It is still important to store this product correctly to ensure its longevity. Black Turbo is very effective on epoxy and enamels but also works well on carbon, grease and paint. This cleaning product is ideal for when you need to clean larger engine parts. You would need to have a large drum of Black Turbo and a dip basket that can be gently lowered into the exposed industrial cleaning product. The parts to be cleaned should remain in the solvent for anywhere from 20 minutes to two hours – depending on your parts to be cleaned. Once removed from the cleaning chemical you will need to rinse thoroughly with water before painting or working on your machine parts.

If you would like to find out more about cleaners available from Blendwell Cleaning Solutions please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals. You will be able to but this and many other industrial cleaning products from our factory near the Gautrain station in Midrand, South Africa. We are the best local cleaning chemical manufacturer!

Monday, 15 October 2012

How to clean machine parts


Cleaning machine parts to be worked on or before refitting requires some very serious cleaning chemicals. The cleaning products required are called soak tank cleaners and they need to be able to effectively cut through huge amounts of grease for the machine parts to clean enough.

Machine parts are usually cleaned using a method called soak tank cleaning. This involves dipping a basket containing the relevant machine parts into a drum containing the cleaning product. These soak tank cleaners can be hot or cold. Typically a cold soak tank cleaner would be solvent based. This usually requires a larger financial outlay initially however if the product is used and stored correctly it can last for as long as five years.

Hot soak tank cleaners are water-based and do not cost as much as cold tank cleaners. There is a rather large running cost on this cleaning product. Hot soak tank cleaners will need to be heated to a temperature of around 70 degrees Celsius before the dip basket can be lowered into the cleaning product. Once it has been heated up adequately the dip basket can be lowered into the cleaning product and may need to stay there for up to two hours. This can equate to five hours of heating.  With electricity costs being what they are these days this can add up to a huge electricity bill.

For more information on how to clean your machine parts and our hot and cold soak tank cleaners please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals. Blendwell Cleaning Solutions will be able to provide you with all the cleaning products you need in your workshop. We are the best local cleaning chemical manufacturer!

Wednesday, 10 October 2012

How to clean your hands at the end of your work day


At Blendwell Cleaning Solutions we like to stay ahead with trends and needs of our customers. It’s important to us to continuously relook at the cleaning products we manufacture and see if we can do them differently to suit new trends in the market. When it comes to cleaning your hands when they are covered in grease all day, it’s not always enough just to get them clean.

We know that having soft hands is something most people would like and many cleaners can be really hard on the skin. Blendwell Cleaning Solutions has recently introduced Bead Cleaner. This hand cleaning products has extra skin softening agents in it for extra moisturisation. There are coconut derivatives and lanolin to help with skin stay soft. We’ve also added beads to this hand cleaner to gently exfoliate the skin while you’re cleaning it. Another added advantage of the beads is that when rinsed down the drain, the beads will float and not clog up the drain.

For further information on this fantastic industrial hand cleaning product please visit www.blendwell.co.za/Bead_Hand_Cleaner. You can buy this hand cleaning product and many others at Blendwell Cleaning Solutions factory in Midrand, South Africa. We are your local cleaning chemical manufacturer! 

Tuesday, 9 October 2012

How to clean greasy hands


When you work in a workshop cleaning your hands after your work day is done is definitely something that requires special cleaning products. Soap and water are not powerful enough for this job. You will need to use industrial hand cleaners. Blendwell Cleaning Solutions has designed a range of industrial hand cleaners for this purpose.

At our factory in Halfway House, South Africa you will be able to purchase gel hand cleaner and grit hand cleaner. These two hand cleaning products are similar and it is a matter of preference as to which one is better. Neither of these hand cleaners contains harsh chemicals that can damage the skin. They both work at lifting grease and grime from your hands when they are rubbed into the skin. You will then rinse off with water. As the name suggests, the grit hand cleaner contains a “grit”. This grit acts as an exfoliating agent and can aid in cleaning.

Blendwell Cleaning Solutions is a manufacturer of a huge range of cleaning chemicals. We supply via resellers and contract cleaners into a large variety of industries. Please visit our website for further information on cleaning at www.blendwell.co.za 

Monday, 8 October 2012

How to clean grease from your hands


When working in industrial environments where there is a great deal of grease and grime to contend with you will need to use some specialised hand cleaning products. Ordinary soap and water are seldom strong enough for large amounts of grease. You will need to invest in cleaning products designed for an industrial application.

Blendwell Cleaning Solutions is a cleaning products manufacturing company based in Midrand, South Africa. The range of cleaning chemicals is enormous and we will have whatever cleaning products you may be looking for. Blendwell Cleaning Solutions has created a cleaning product called Barrier Cream that you apply to your hands before you start any work that involves heavy grease or having your hands in water for long periods. You may need to re-apply this cleaning product several times through the day. When your work is completed simply wash your hands as normal to wash away the Barrier Cream and the grime!

Look out for other hand cleaning products manufactured by Blendwell Cleaning Solutions. We have fantastic range. Please visit www.blendwell.co.za for more information on your favourite local manufacturer of cleaning chemicals.

Friday, 5 October 2012

How to clean your workshop - Part 2


Maintaining cleanliness in an industrial environment is important. Accidents happen easily in these areas as there is often a fair amount of hard to remove grease around. It is vital that regular cleaning programmes are followed.

When considering a cleaning product for maintenance cleaning, a great choice for your workshop floor is Yellow Floor Powder. It’s awesome to use because it contains no caustic like many other floor cleaners. This does not mean it has poor performance, in fact it has excellent fat, grease and dirt removing properties.

Simply wet the floor and sprinkle a fair amount of powder over it. You can use a stiff broom to work it into the floor. Leave to activate for about 20 minutes and then rework with the broom. You can now wash off with excess water.

For all your industrial cleaning chemicals contact Blendwell Cleaning Solutions today. You can find more information on the industrial cleaning products that we manufacture at www.blendwell.co.za. We are the best local manufacturer of cleaning chemicals in Midrand, South Africa.

Wednesday, 29 August 2012

HACCP Cleaning- General Cleaning - Rinse Aid H


When using industrial dishwashers, I have already recommended in a previous post that you should use Superdish H. Blendwell Cleaning Solutions has another cleaning product to use in conjunction with Superdish H.

Blendwell Cleaning Solutions has created Rinse Aid H to be used as a rinsing additive in these industrial machines.  This cleaning product is highly concentrated and is at industrial strength and is guaranteed to give you streak free results everytime. This cleaning chemical is low foaming and very economical.

Please visit www.blendwell.co.za/Food_Industry_Cleaning_Products for more information on cleaning products that are HACCP compliant. Blendwell Cleaning Solutions has a factory in Halfway House, South Africa. We are your local cleaning chemical manufacturer!

Wednesday, 16 May 2012

Industrial Cleaning - Floor Cleaning - Brickwash


For cleaning floors that have been exposed to building work where excess cement has dropped on the floor and not been cleaned up in time, you will need to use a seriously strong cleaning chemical.

For this level of cleaning a plain cement floor, I would recommend a Blendwell Chemicals product called Brickwash. This cleaning chemical is a highly acidic detergent blend and must be handled with great care.  It works really well on floors that have not been cleaned for a long time but have a large amount of grease build-up. It also works really well as a primer if you want to paint the floor afterwards – just be sure to rinse all of the cleaning chemical off and allow to dry before attempting to paint.

It is also effective at removing cement left over from building work as well as cleaning away lime discolouration left on stone and bricks. Always use full safety gear when handling this product as it is highly acidic. If you choose to use this cleaning chemical it should only be for once off cleaning. If used repeatedly it can strip away the floor completely. Do not use on a painted floor if you want the paint to remain.

Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicalsfor more information on Brickwash and the other cleaning chemicals that Blendwell Chemicals manufactures. We supply our cleaning chemicals from our factory in Midrand, South Africa and we are your local cleaning chemical supplier!

Thursday, 3 May 2012

Industrial Cleaning - Floor Cleaning - Wac GP Cleaner


Cleaning floors in a workshop is no small feat so you’ll want to do it right the first time. There are a few options that I have already discussed but there is always Wac GP Cleaner.

This cleaning chemical is an awesome cleaning chemical to have as a stock item. It can be used to clean just about anything that can tolerate water. This cleaning product is a combination of a detergent and a degreaser. While the degreasing agents in this cleaning product work to lift the dirt and grease from the surface the detergent helps to wash it away. Wac GP Cleaner complies with the SABS 1344 mark.

For cleaning your factory or workshop floor, you will need to use this cleaning chemical at a dilution of 1:5. This will mean that for 5 litres of cleaning solution, you will need one litre of Wac GP Cleaner and four litres of water. You can then use a broom to work this cleaning chemical into your floor, leave for a few minutes to let it work and rinse clean.

For more information on this cleaning chemical and all the other industrial cleaning chemicals that we manufacture, please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals. You will find the Blendwell Chemicals factory in Midrand, South Africa. We are your local cleaning chemical manufacturer! 

Wednesday, 2 May 2012

Industrial Cleaning - Floor Cleaning


When it comes to cleaning in an industrial environment, having the right cleaning chemicals and using the right tools is vitally important. You can save yourself a lot of time and energy by using the right equipment.

You will need to assess just how dirty the floors are and how much cleaning they will require. If it’s not too bad you can consider looking at using a brush for the dirtier areas and a broom for the general areas.  You will be using both the brush and broom with cleaning chemicals in a wet state. It is best to pour the cleaning solution onto the wet floor and then work it in with the broom.

If you are needing to use more specialised equipment you can look at using a high pressure washer to help lift off the grease and grime. Another option to consider is to use a scrubbing machine. A scrubbing machine will help you work away that grease without all the sweat – this is a great option if you have a huge amount of grease that hasn’t been cleaned for a long time.

For more information on cleaning workshop floors please come back and see the blogs that will be following this one. You can also visit our website at www.blendwell.co.za/Industrial_Cleaning_Chemicals for further information on industrial cleaning. The Blendwell Chemicals factory is in Johannesburg, South Africa and we are your local cleaning chemical manufacturer!

Tuesday, 24 April 2012

Industrial Cleaning - Soak Tank Cleaners - Powder 235


When choosing a soak tank cleaner it is important to select the right one for the job you have in mind. Your budget may help you decide what type of soak tank cleaner to go for as well as your facilities. A cold tank cleaner is more expensive initially but has low running costs and does not require specialised heating equipment.

Powder 235 is a powder that is diluted in water between 10 and 15%. The solution then needs to be heated to around 80 degrees Celsius. When the temperature has been reached the parts to be cleaned can be submerged in the dip basket and left for as long as necessary.  Remove when clean and rinse thoroughly with clean water.

Powder 235 is not recommended for aluminium, bronze, brass or other special alloys. Powder 235 does work on all ferrous metals.

Please visit www.bleandwell.co.za/Industrial_Cleaning_Chemicals for more information on the industrial cleaning chemicals that we manufacture. We have a factory in Midrand, South Africa and we are your local cleaning chemical supplier!

Monday, 23 April 2012

Industrial Cleaning - Soak Tank Cleaners - Bupi Cleaner


Blendwell Chemicals manufactures a range of cleaning chemicals for industrial cleaning. One of the soak tank cleaners that we manufacture is Bupi Cleaner and this chemical requires a high temperature for cleaning effectively.

This industrial cleaner works well as a soak tank cleaner for small engine parts as well as being able to spray it onto engines using a high pressure cleaner called a bupi gun. Bupi Cleaner works well with most metals but is not as strong as some of the other soak tank cleaners we manufacture. This cleaning chemical can struggle a little when stripping paint but is also not as harsh on the metal being cleaned.

When using as a soak tank cleaner, mix the white powder with water and heat up to 80 degrees Celsius. Place parts into a metal basket and gently lower the basket into the solution. Leave in place for 2 hours and remove and rinse thoroughly. This cleaning chemical can also be sprayed onto parts to be cleaned.

For more information on this industrial cleaning chemical please visit our website at www.blendwell.co.za/Industrial_Cleaning_Chemicals. We have a factory in Midrand, South Africa and we are your local cleaning chemical supplier! 

Wednesday, 18 April 2012

Industrial Cleaning - Soak Tank Cleaners - Black Turbo

It ‘s important to choose the right type of soak tank cleaner for the job you have in mind.

If you’re needing to clean larger engine parts then ideally you should look to use a cleaning chemical that Blendwell Chemicals calls Black Turbo. Black Turbo is really effective on epoxy and enamels and works very well on carbon, grease and paint. This cleaning chemical has a built in water seal which can help the solvent layer of this cleaning chemical not evaporate so it is necessary to close the container when not in use. Black Turbo has a high vapour pressure so it’s important to take care when opening the container.

For more information on this and other industrial cleaning chemicals please visit our website at www.blendwell.co.za/Industrial_Cleaning_Chemicals. Blendwell Chemicals manufactures a huge range of cleaning chemicals from their factory in Midrand, South Africa. We are your local cleaning chemical supplier!

Tuesday, 17 April 2012

Industrial Cleaning - Soak Tank Cleaners - Part 2

I have previously discussed the basics of soak tank cleaners. There are 2 different types – hot and cold soak tank cleaners. Cold tank cleaners cost more initially but have much lower running costs.

It’s really important to look after cold tank cleaners to make sure that the chemical does not evaporate. All cold tank cleaners are made up of two separate layers - one solvent and one water –based. When not in use it is vital that this cleaning chemical is properly sealed so that there is no evaporation. The ratio between the water and solvent layer must be maintained. The water layer is there to act as a water seal to prevent evaporation of the solvent layer below. There needs to be 18% water and the rest should be solvent. To ensure that this ratio is maintained the rod test is very effective. Simply take a metal rod that has been painted. Put this rod in the drum of soak tank cleaner and push it down until it touches the bottom. When you pull the rod out the part where the paint has been removed will show how much of the drum is filled with solvent.

To use soak tank cleaners, both hot and cold, you will need to have a dip basket. This dip basket will need to have some holes in it so that when the basket is removed from the drum the chemical does not come with it. This basket will be lowered into the soak tank and left there for anything from 20 minutes to 2 hours. After enough time has passed to clean the items in the basket, raise the basket from the drum and allow for any remaining chemical to drain out of the holes in the basket back into the drum. The parts that were in the basket will need to be thoroughly rinsed with water before repainting or working on them.

Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals for more information on the vast range of industrial cleaning chemicals that we manufacture. Our factory can be found in Halfway House, South Africa. We are your local chemical supplier!

Monday, 16 April 2012

Industrial Cleaning - Soak Tank Cleaners

Cleaning in an industrial environment can be a very complicated process. First, you will need to assess the level of dirt, grease and grime you need to clean. Typically, in an industrial environment like a factory or workshop there is an excessive amount of grease and oil to deal with. Parts will regularly need to be cleaned before they can be worked on or refitted to engines.
There are two ways to do soak tank cleaning. You can use a solvent based chemical or you can use a water-based chemical.

A solvent based cleaning chemical is expensive to purchase in the first place however it’s running costs are dramatically less and can save you money in the long term. If correctly stored and used the cleaning chemical could last as long as five years. This cleaning chemical can evaporate so it needs to be properly covered and sealed when not in use.  Blendwell Chemicals has made all of their solvent soak tank cleaners to have a water layer on top to help prevent evaporation. This water layer acts as a water seal.

A water-based soak tank cleaner is not expensive to buy but costs a lot to use. It would need to be heated to 70 degrees Celsius and that alone can take 3 hours. The temperature must be maintained for as long as parts are soaking which could be up to 2 hours. Realistically you would be looking at about 5 hours of electrical heating which with rising electricity costs can become really expensive very fast.

Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals for more information on soak tank cleaners and all the other industrial cleaning chemicals in our huge range. All our chemical products are manufactured at our factory between Johannesburg and Pretoria near the Midrand Gautrain station. We are your local cleaning chemical supplier!