Showing posts with label degreaser. Show all posts
Showing posts with label degreaser. Show all posts

Wednesday, 1 August 2018

How to clean with degreasers - machine parts

Engineering workshops often have a really hard time cleaning machine parts. These parts can be so heavily covered in grease that they are difficult to clean. Blendwell Chemicals has the perfect degreasing cleaning chemical for this job and is most commonly used in the engineering and mining sectors.
Black Turbo
is a cold tank cleaner and can seem quite expensive to use. However, this cleaning product is reusable and is incredibly effective on grease, carbon and paint. It also works really well on epoxy and enamel.
This industrial 
cleaning chemical is mostly made up of solvents that strip the parts to be cleaned. There is also a built- in water seal which prevents unnecessary evaporation. This process should be done in a well ventilated area and full safety gear should be worn. Ideally, the part should be dipped into this cleaning chemical for about 30-60 minutes. It is best to use some type of hoist to lower the object to be cleaned into the chemical. This should be more than enough time to remove all the grease and grime. The item to be cleaned is then removed and rinsed clean with water.
Please be sure that when the time comes to replace this 
machine cleaning chemical with a fresh one that the chemical is disposed of responsibly. A waste disposal company should be hired for this purpose to ensure that the chemical, which can be hazardous to the environment, does not cause any harm. This cleaning product can be sometimes be boosted to allow it to be used even more often rather than replaced.
Blendwell Chemicals manufactures
Black Turbo and a large range of industrial heavy duty degreasers.

To find out more about our range of workshop cleaning chemicals please contact us.


Blendwell Chemicals has a factory in Midrand, South Africa. We are your local cleaning chemical supplier.

Friday, 15 March 2013

Basic Guide to Cleaning


There are some important things you will need to know before you can be sure of how to clean something. Blendwell Chemicals guide to cleaning has a series of questions you need to ask in order for you to get the job done.

First you have to work out if the type of dirt you are cleaning is oil-based or not. If the dirt is oil you will need to use some type of degreaser as this will help to lift the oil off the surface.

The next thing you’ll need to take into account is whether or not the surface you are cleaning is porous. If the surface is porous then it may require some extra care. A porous surface will be able to absorb the dirt and it may sink into deeper layers. Hard surfaces can also be scratched or etched if not handled properly. It’s always good to know the nature of the surfaces you are dealing with.

How to clean will then depend on what concentration of cleaning products you use. As I’ve often said using the right cleaning product, the right way will save you huge amounts of hassle. You should ask yourself if a foaming or non-foaming product will work best for your application and how warm should the cleaning product and water be when it is applied. The cleaning chemical may need some contact time so it may be best to apply and then wait a few minutes. However, some cleaners work quickly and may cause damage if left too long. You will need to know how to apply the cleaning product and what mechanical action may be required for the best results.

Blendwell Chemicals can help you find the answers to all your cleaning questions. We manufacture a huge range of cleaning products in our factory in Midrand, South Africa. To find out more, please visit our website at www.blendwell.co.za. We are the best local cleaning chemical wholesaler.

Monday, 19 November 2012

The rules of cleaning


Cleaning needn’t be a horrible chore. Regardless of what you are cleaning – whether it is your home, office, factory, shop or workshop – the same rules apply. If you follow the basic rules of cleaning it will go faster and you’ll get better results. Being prepared and using the right cleaning products in the right way will save you time, money and avoid damage to yourself, the item being cleaned and even the environment.

The rules:

1.  Use the correct cleaning product for the job at hand.
This can save you hours of work. It is worth investing in the correct cleaning products for each of the things that you clean. Trying to clean a well-used fry top with dishwashing liquid is never going to give you great results no matter how concentrated the dishwashing liquid is. It simply does not have enough degreasing power to cut through the fats and grease and burnt on carbon. Using the correct products will leave you with a hygienic work environment. There have been studies that prove that work environments that are clean have better attendance and performance from employees. Now isn’t that a good reason to clean up your act?

2. Use the cleaning product the correct way
Using the cleaning product correctly will mean that you will need to use the correct equipment for the item you need to clean and dilute the cleaning product correctly. Read the instructions of your cleaning product. Some items can be easily damaged and this can cost an enormous amount of money to replace. For example, don’t use a scouring pad to clean a plastic container or a traditional mop to clean laminate floors. By not diluting the cleaning product correctly you will also waste the cleaning product. By not diluting enough, the cleaning product will be stronger than it needs to be and can cause damage to the item as well as putting extra pressure on the environment when it is thrown out. By diluting too much, the cleaning product may be ineffective.

For more information on cleaning and fantastic cleaning products, please visit our website at www.blendwell.co.za. Blendwell Cleaning Solutions manufactures an amazing range of cleaning products in Midrand, South Africa. We are the best local cleaning products wholesaler.

Thursday, 4 October 2012

How to clean your workshop - Part1


Cleaning a workshop can be a major challenge. There is usually a huge amount of grease that needs to be cleaned and grease and grime can quickly and easily get out of hand and create big problems in this environment. Besides, it not looking nice it can also be a safety hazard as floors become really slippery and injuries are just waiting to happen.

Cleaning the floor in your workshop is a good first step to cleaning up your space. A great product for this is Blendwell Cleaning Solutions Maxikleen. Maxikleen is a degreaser and carries the SABS 1344 mark. It is a powerful cleaning product and is made to cut through grease and clean at the same time. This cleaning product contains both a degreaser and a detergent.

The best way to use this cleaning product is to mix one part Maxikleen with 10 parts of water. Spread the solution over the workshop floor that you would like to clean with a broom and leave it to activate from a few minutes.  Then simply scrub away with a broom and the grease will be lifted off the floor. You can also use a high pressure cleaner is you have one. This will make the job a little easier if you have a huge space to clean.

For more information on Blendwell Cleaning Solutions and how they can help you clean your workshop, please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals . We are your best local cleaning chemical manufacturer in Johannesburg, South Africa!

Friday, 21 September 2012

What is Eco-Lyte DG?


When ordinary salt and water are passed through electro chemical activation there are two solutions that are created. One is anolyte and we call it Eco-Lyte NTL and the other is catholyte and we call this Eco-Lyte DG. Because these products are only made from salt and water they are completely eco-friendly. This is the ultimate in environmentally friendly cleaning.

This cleaning product has a pH of between 11 and 13 and be used for flocculation (of heavy metals), coagulation, washing, extraction and degreasing. Often green cleaning products are considered to be less effective than traditional cleaners. This is not the case when it comes to the Eco-Lyte cleaning products. These green cleaning products are extremely powerful.

Blendwell Cleaning Solutions supplies the Eco-Lyte green cleaning products from their factory in Midrand, South Africa. Please visit their website at www.blendwell.co.za for more information on these awesome cleaning products.

Monday, 14 May 2012

Industrial Cleaning - Floor Cleaning - Maxikleen


When cleaning your factory or workshop floor lifting all the grease and grime that exists is something that is not that easy to do but is very necessary.  You may need to use some powerful cleaning chemicals to help you achieve this goal.

A fabulous cleaning product to consider is Blendwell Chemicals Maxikleen. Maxikleen is another one of those really versatile cleaning chemicals that can be used almost anywhere because it is a degreaser and detergent in one. Maxikleen is a brilliant product to use because it complies well above requirements for SABS 1344 so you can be sure of this cleaning product being all that you need it to be.

For cleaning workshop floors, I would recommend that you dilute this cleaning chemical at a ratio of 1:10 with water. This would mean that to make up 5 litres of cleaning solution you will need 500ml of Maxikleen to be mixed with 4,5 litres of water. Simply scrub the cleaning solution into the floor with a broom and leave for a few minutes for it to activate. Brush the floor again with the broom and rinse with clean water.

For more information on the range of industrial cleaning chemicals available from Blendwell Chemicals, please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals. Blendwell Chemicals has a factory in Midrand, South Africa and we are your local cleaning chemical supplier!

Tuesday, 17 April 2012

Industrial Cleaning - Soak Tank Cleaners - Part 2

I have previously discussed the basics of soak tank cleaners. There are 2 different types – hot and cold soak tank cleaners. Cold tank cleaners cost more initially but have much lower running costs.

It’s really important to look after cold tank cleaners to make sure that the chemical does not evaporate. All cold tank cleaners are made up of two separate layers - one solvent and one water –based. When not in use it is vital that this cleaning chemical is properly sealed so that there is no evaporation. The ratio between the water and solvent layer must be maintained. The water layer is there to act as a water seal to prevent evaporation of the solvent layer below. There needs to be 18% water and the rest should be solvent. To ensure that this ratio is maintained the rod test is very effective. Simply take a metal rod that has been painted. Put this rod in the drum of soak tank cleaner and push it down until it touches the bottom. When you pull the rod out the part where the paint has been removed will show how much of the drum is filled with solvent.

To use soak tank cleaners, both hot and cold, you will need to have a dip basket. This dip basket will need to have some holes in it so that when the basket is removed from the drum the chemical does not come with it. This basket will be lowered into the soak tank and left there for anything from 20 minutes to 2 hours. After enough time has passed to clean the items in the basket, raise the basket from the drum and allow for any remaining chemical to drain out of the holes in the basket back into the drum. The parts that were in the basket will need to be thoroughly rinsed with water before repainting or working on them.

Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals for more information on the vast range of industrial cleaning chemicals that we manufacture. Our factory can be found in Halfway House, South Africa. We are your local chemical supplier!

Monday, 16 April 2012

Industrial Cleaning - Soak Tank Cleaners

Cleaning in an industrial environment can be a very complicated process. First, you will need to assess the level of dirt, grease and grime you need to clean. Typically, in an industrial environment like a factory or workshop there is an excessive amount of grease and oil to deal with. Parts will regularly need to be cleaned before they can be worked on or refitted to engines.
There are two ways to do soak tank cleaning. You can use a solvent based chemical or you can use a water-based chemical.

A solvent based cleaning chemical is expensive to purchase in the first place however it’s running costs are dramatically less and can save you money in the long term. If correctly stored and used the cleaning chemical could last as long as five years. This cleaning chemical can evaporate so it needs to be properly covered and sealed when not in use.  Blendwell Chemicals has made all of their solvent soak tank cleaners to have a water layer on top to help prevent evaporation. This water layer acts as a water seal.

A water-based soak tank cleaner is not expensive to buy but costs a lot to use. It would need to be heated to 70 degrees Celsius and that alone can take 3 hours. The temperature must be maintained for as long as parts are soaking which could be up to 2 hours. Realistically you would be looking at about 5 hours of electrical heating which with rising electricity costs can become really expensive very fast.

Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals for more information on soak tank cleaners and all the other industrial cleaning chemicals in our huge range. All our chemical products are manufactured at our factory between Johannesburg and Pretoria near the Midrand Gautrain station. We are your local cleaning chemical supplier!

Wednesday, 4 April 2012

Industrial Cleaning - Engine Cleaning - RTU

When cleaning engines you will need to decide on what type of chemical product you will need to use. Choosing between a solvent cleaner or a water-based cleaner will be decided upon depending on what level of grease you are dealing with and how sensitive is the environment you are cleaning in.

If you have chosen a solvent cleaner then you may want to consider a cleaning chemical like Blendwell Chemicals RTU. RTU is a ready to use solvent degreaser. You will not need to dilute this product before use. RTU is solvent based and has added emulsifiers and degreasers. This cleaning chemical has exceptional grease cutting power and does not leave any residue behind. RTU is best used when brushed onto the surface to be cleaned or you can also use a spray gun. Leave the chemical on the surface undisturbed for 10 minutes and then wash off with excess water.

Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals for more information on this and other industrial cleaning products manufactured by Blendwell Chemicals. We have a factory in Johannesburg South Africa and we are your local cleaning chemical supplier! 

Tuesday, 3 April 2012

Industrial Cleaning - Engine Cleaning

When cleaning engines, there are a few different ways you can approach this cleaning job. 
This is generally a huge task and to choose the right method for you is important.
If you have a high pressure cleaner you can use it for cleaning or alternatively if you do not you may want to brush or spray the chemical onto the surfaces to be cleaned.

You could also use a dip tank as we will discuss in detail later (this can also be called a soak tank cleaner). Your final option would then be a parts cleaner (also sometimes called a bupi machine).

When it comes to the cleaning chemical you would want to use you then have the option of solvent – based or water – based.  Typically a solvent works better and faster. The problem is when you have cleaned the engine and rinse off the used cleaning chemical then runs into the drain and ultimately into watercourses. A solvent has a much greater negative impact on the environment than a water-based degreaser.

One more thing to watch out for is if you have chosen a solvent degreaser, make sure that it is a mixture of degreaser and detergent. When the product is rinsed off, the cleaning chemical will go with it. This means that there will be no residue left behind. This residue can be a huge attractor of dirt if left in place.

Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals for more information on the huge range of cleaning chemicals that we manufacture. You will be able to find our factory in Midrand, South Africa. We are your local cleaning chemical supplier!

Thursday, 22 March 2012

What is industrial cleaning? - Part 2

I previously discussed some words that you will come across when dealing with industrial cleaning products. Today, I will discuss a few more terms.

We have spoken about pH and how a substance is either neutral, acid or alkali. The term alkali refers to when a substance has a pH reading of more than 7 and is able to dissolve in water. When a cleaning product has a neutral pH it means that it has a pH of 7. Pure water would have a pH of 7.

The term acid would then refer to a substance with a pH of less than 7. An acidic substance is able to neutralise an alkali substance as well as dissolve some metals.

Any substance that is excessively acid or alkali must be handled with extreme care.

You will probably also come across a word like emulsify or emulsification. Emulsification occurs when a layer of fat or grease is broken down into small particles and is able to be suspended. This would be useful when cleaning a surface that is very greasy. By breaking down the layer of grease into smaller particles, it becomes much easier to wash it away.

Usually in industrial cleaning you will be looking at two types of cleaners: either detergents or degreasers. Detergents are chemical cleaning products that are made up of chemical compounds and act like soap. Soap would typically be made from fats and lye.

A degreaser is a chemical product that is able to dissolve water insoluble substances like fats and grease.

For more information on industrial cleaning chemicals please visit our website at www.blendwell.co.za/Industrial_Cleaning_Chemicals. We manufacture a huge range of cleaning chemicals and supply them from our factory in Midrand, South Africa to where ever you are. We are your local cleaning chemical supplier!

Monday, 5 March 2012

How to clean your office the eco-friendly way - Part 5

Cleaning green has become so important these days. Cleaning in an eco-friendly way is not just about using cleaning products that don’t harm the environment if they are dumped. It is also about after you have used your cleaning chemicals and the effect that the left-over diluted chemical can have on rivers and streams. Of course, it is also important to use green cleaning chemicals that will do no harm to the people who have to use these cleaning products and that there is no harm to the people that use the things that have been cleaned.

The Delphis Eco range of eco-friendly cleaning chemicals will not do harm to people or the environment. The products have been made and created with the utmost care to ensure that they give you the best quality green cleaning products.

The usually small kitchen areas in office suites can often get very messy. The oven and stove is one such area that needs to be cleaned properly and often. Food that is spilt while cooking and not cleaned straight away will become burnt on and become really difficult to get off. If this has happened, you’ll need the extra cleaning power for this job that you can find in Delphis Eco’s Heavy Duty Degreaser. This fantastic green cleaning product has industrial-strength power without harming the environment and to top it off it also carries the SABS 1828 mark.

The Delphis Eco range of green cleaning products is manufactured by Blendwell Chemicals under license to the UK. Blendwell Chemicals is in Midrand South Africa, near the Gautrain station. Please visit www.blendwell.co.za/Green_Cleaning_Products for more information on Heavy Duty Cleaner and all the other wonderful products in this range.   

Monday, 27 February 2012

Using eco-friendly cleaners in the kitchen

Previously I showed you a picture of a fryer that had been cleaned with Delphis Eco's Heavy Duty Degreaser. Only half of the fryer had been cleaned and then the fryer was put through it's normal use before the picture was taken. The picture clearly showed that the cleaning product used works really well.


Now I mentioned that the cleaning product that worked that magic is the Heavy Duty Degreaser and that it is an eco-friendly product but there's more to it. As an eco-friendly product it contains no caustic. This then means that there are no nasty fumes. Using this product is so much easier than using a traditional cleaner and as well as being safer to use. Not only is this cleaning product green, it is also food grade. This cleaning chemical carries the SABS 1828 mark and is HACCP compliant. On top of this, Heavy Duty Degreaser is also Halaal certified. If you have a food factory, restaurant or industrial kitchen, Heavy Duty Degreaser is the obvious choice. 


The Delphis Eco green cleaning products range is manufactured by Blendwell Chemicals in their factory in Midrand, South Africa. Please visit www.blendwell.co.za/Green_Cleaning_Products to see the vast range of cleaning chemicals manufactured by Blendwell Chemicals. We are your local chemical manufacturer!

Cleaning a fryer the eco-friendly way!

Fryers in a kitchen can get pretty disgusting really fast. There is usually a large amount of food that gets cooked on these fryers and some of it usually remains behind to be re-cooked time and again. This will lead to a permanent layer of burnt-on grease. This grime is generally very difficult to remove. You will need an industrial strength cleaner to remove this dirt.

Delphis Eco is manufactured by Blendwell Chemicals under license to the UK. The Delphis Eco range of cleaners is a truly green cleaning range of chemicals. These eco-friendly products are easy to use, effective and do no harm to the user or the environment.
To clean a fryer I would recommend using the Heavy Duty Degreaser from the Delphis Eco range. I recently got a picture of a fryer that was cleaned with Heavy Duty Degreaser at 40 degrees Celsius. The Heavy Duty Degreaser was diluted 1 part chemical to 10 parts of water. Only half of the fryer was cleaned. This picture was taken a week later.

Considering that a week of use had occured this fryer stayed amazingly clean. Yet again, proof that Delphis Eco eco-friendly cleaning products are fantastic.

Blendwell Chemicals supplies Delphis Eco green cleaning products from their factory in Midrand, South Africa. Please visit www.blendwell.co.za/Green_Cleaning_Products for more information on these awesome cleaning products. Blendwell Chemicals is your local cleaning chemical manufacturer!



Friday, 17 February 2012

How to clean green - The Proof

So I've been going on about how great the Delphis Eco products are. I figured it was time to show you some proof so that you can see for yourself. 



This is a picture of a gas braai that has not been cleaned in some time. As you can see from the picture there is a fair amount of burnt-on grime. This gas braai was then cleaned with Delphis Eco's Heavy Duty Degreaser on the outside. This eco-friendly cleaning product easily removed the grease on this braai and it did it with no harm to the environment or the people doing the cleaning. Traditionally, degreasers can be very harsh to the user but this Heavy Duty Degreaser is water-based and natural. 

This picture shows the same gas braai after being cleaned and I bet it's been many years since this braai sparkled.

The last picture I will show you is of the inside of the gas braai where only part of it was cleaned to be able to show you the difference between before after cleaning. You'll notice the difference is quite obvious and it's clear that this green cleaning product is really effective.

So there you have it! Delphis Eco products are green and they get the job done. Blendwell Chemicals manufactures the Delphis Eco range of cleaning chemicals under license to the UK. For more information on these products please visit www.blendwell.co.za/Green_Cleaning_Products
Blendwell Chemicals has a factory in Midrand, South Africa and is your local cleaning chemical supplier!



Monday, 13 February 2012

How to clean green - Kitchens - Part1

Kitchens can be very messy places and keeping them hygienic can sometimes be an enormous challenge. Being able to clean your kitchen and be green about it used to be impossible but not anymore. Delphis Eco’s green cleaning products perform effectively and safely for you and the environment.

There is even an industrial strength cleaner called the Heavy Duty Degreaser that is superb at cutting through fat, oil and grease from all hard surfaces in your kitchen or food factory. It works on floors, walls, food preparation areas, machinery and industrial equipment. This eco-friendly cleaning product is ideal for cleaning ovens, grills, flat tops and extraction canopies. Always remember to wipe your surfaces dry in food preparation areas.

The thing that is so awesome about this cleaning product is that it is a natural water-based degreaser. It cuts through grease, oil, grime and hydrocarbon deposits more effectively than any comparative product without causing any harm to the user or the environment.

For more information on Delphis Eco’s Heavy Duty Degreaser please visit www.blendwell.co.za/Green_Cleaning_Products The Delphis Eco range is manufactured by Blendwell Chemicals under license to the UK. Blendwell Chemicals has a factory near Pretoria in South Africa. We are your local cleaning chemical supplier!




Monday, 21 November 2011

How to clean food preparation surfaces – degreasing

In the industrial kitchen and food factory there is a huge amount of cleaning required. It is imperative that the industrial kitchen gets cleaned frequently so as to avoid the growth of bacteria and enzymes. Should a food factory have a problem with bacterial growth, one can expect a huge loss of product.
The types of cleaning products used to clean an industrial kitchen and food factory need to be carefully selected. For cleaning an area that is going to come into direct contact with food, particularly meat or fish, it is a good idea to use a cleaning product that does not have any fragrance. Fragrance can help speed up and the growth of bacteria as well as contaminate the taste of the food.
A great product to use to clean these surfaces is Blendwell Chemicals Quot HF. Quot HF is a general –purpose detergent disinfectant. This makes it ideal for use in food preparation areas as cleaning and disinfecting can happen in one easy process. Quot HF will quickly lift off grease and oils for your table top. When using any cleaning product it is always a good idea to wear gloves and safety eyewear.
First, dilute 100ml of Quot HF in 4.9litres of water. Then you can either wipe or spray on the cleaning solution. Follow this with wiping the area with a clean damp cloth. The surface should now be perfectly clean.
For more information on this and other cleaning chemicals please visit www.blendwell.co.za Blendwell chemicals has a factory near Pretoria in Gauteng. We are your local cleaning products supplier

Friday, 18 November 2011

How to clean an industrial oven - degreasers

In the industrial kitchen, cleaning is of paramount importance. Due to constant use, regular cleaning is vital. Industrial ovens often get coated in grease and oil as well as having the problem of completely burnt pieces of food stuck to the interior.
To clean an industrial oven, you can use a product like Blendwell Chemicals Alkali Cleaner. This cleaning chemical is caustic based and will do an excellent job of making your oven shine. Do not use Alkali Cleaner on domestic ovens or on self-cleaning ovens. When using this cleaning chemical be sure to always wear gloves and safety eyewear. In order to aid the cleaning power of this chemical it has been designed with a pH of around 12. This means that it should not come into contact with skin or eyes at all.
Mix 1 litre of Alkali Cleaner into 5 litres of water. Ideally you should use warm water. It is easiest to spray this solution onto the interior surfaces of your oven but you can also use a cloth to spread it on. Leave the solution to activate for about 20 minutes. After this time you should be able to wipe off with a cloth. If all the dirt has not been removed you can increase the concentration of the solution. Add another 50ml to your original solution. Repeat the process again. Be sure once the oven is clean that you wipe down the interior with a clean wet cloth to remove any chemical residue.
You would be able to buy Alkali Cleaner from Blendwell Chemicals in Johannesburg, South Africa. We are your local supplier. Please go to our website at www.blendwell.co.za for more information on all our cleaning chemicals.

Thursday, 17 November 2011

How to clean your kitchen sink

It’s not a bad idea to give your kitchen sink a good clean every once in a while. Lucky it should see a good amount of soap so yours may not be too bad, but even soap can leave a residue.
It’s important to remember that most sinks can scratch so do not use abrasive cleaners. You should always wear gloves and be sure to not splash product in your eyes when doing any kind of cleaning. For lightweight cleaning, you could consider using a product like Blendwell Chemicals Cleardet. What’s great about Cleardet is that it does not have fragrance. This means that it will not interfere with any food that comes into contact with the surface that has been cleaned with it. Simply add 50ml to about 5litres of warm water and clean all the parts of your sink. Don’t forget to include the plug and plughole and the taps. Use a soft sponge or cloth to clean and rinse thoroughly with clean water when finished.
If you have some marks that don’t respond to this solution you can try a product like Blendwell Chemicals Maxikleen. You should use Maxikleen in the same way as Cleardet. Dilute 50ml in about 5 litres of warm water and only use a soft sponge or cloth to clean. Be sure to rinse thoroughly afterwards.
By  cleaning your sink regularly and making sure that solids are not washed down the drain you can limit the times you will need to unblock your drain. Be sure to check with the manufacturer of your sink that these cleaning methods are acceptable to their particular brand.
Blendwell Chemicals manufactures a huge range of cleaning products. They have a factory in Midrand South Africa. For more information on their range of cleaning products, please visit www.blendwell.co.za Blendwell Chemicals is your local supplier.

Tuesday, 8 November 2011

How to clean kitchen wall tiles

A kitchen is an area that can quickly get covered in layers of grease and grime that occur when cooking. Wiping down all the surfaces after use certainly helps keeping the grease at bay but sometimes it can build up in areas around that stove.

Daily cleaning with a squirt of dishwashing liquid, like Blendwell Chemicals Greendet, in a sink full of water can go a long way. Simply wipe down surfaces with a clean cloth that has been dipped in this solution.

For a deeper clean you may need to get more serious. The type of tiles that you have in your kitchen will determine how you clean them. Glass tiles will need extra care as they are very prone to scratching. You will need to use a soft cloth and be very gentle when rubbing. Glazed ceramics tiles can take a little more aggression but it is still better to not be too hard on them. Cleaning is made a great deal easier with grout that has been properly sealed. The dirt can then be wiped away and no heavy scrubbing is required. If the grout is not properly sealed it will stain really easily and you will be left with unsightly marks that penetrate through the grout and no matter how much you scrub the marks do not disappear. In this case, it is best to consider redoing the grout and sealing.

The quickest way of cleaning the tiles is to find a spray bottle and fill it with 50ml of Wac GP Cleaner and 450ml warm water. Spray this solution onto the tiles and leave for 5 minutes. At this point you should be able to simply wipe off any residue grease and dirt. If the grease is just too stubborn then add an extra 50ml of Wac GP Cleaner to your spray bottle, spray the area and leave for 5 minutes to activate. After removing all the grease wipe the area with a clean wet cloth to remove any left over chemical.

For more information on Wac GP Cleaner and any of the other cleaning products that are manufactured by Blendwell Chemicals, please go to www.blendwell.co.za. Blendwell Chemicals is a cleaning chemical manufacturer based in Midrand near the Gautrain station. We manufacture a huge range of cleaning chemicals.