Engineering workshops often have a really hard time cleaning machine parts. These parts can be so heavily covered in grease that they are difficult to clean. Blendwell Chemicals has the perfect degreasing cleaning chemical for this job and is most commonly used in the engineering and mining sectors.
Black Turbo is a cold tank cleaner and can seem quite expensive to use. However, this cleaning product is reusable and is incredibly effective on grease, carbon and paint. It also works really well on epoxy and enamel.
This industrial cleaning chemical is mostly made up of solvents that strip the parts to be cleaned. There is also a built- in water seal which prevents unnecessary evaporation. This process should be done in a well ventilated area and full safety gear should be worn. Ideally, the part should be dipped into this cleaning chemical for about 30-60 minutes. It is best to use some type of hoist to lower the object to be cleaned into the chemical. This should be more than enough time to remove all the grease and grime. The item to be cleaned is then removed and rinsed clean with water.
Please be sure that when the time comes to replace this machine cleaning chemical with a fresh one that the chemical is disposed of responsibly. A waste disposal company should be hired for this purpose to ensure that the chemical, which can be hazardous to the environment, does not cause any harm. This cleaning product can be sometimes be boosted to allow it to be used even more often rather than replaced.
Blendwell Chemicals manufactures Black Turbo and a large range of industrial heavy duty degreasers.
To find out more about our range of workshop cleaning chemicals please contact us.
Blendwell Chemicals has a factory in Midrand, South Africa. We are your local cleaning chemical supplier.
Black Turbo is a cold tank cleaner and can seem quite expensive to use. However, this cleaning product is reusable and is incredibly effective on grease, carbon and paint. It also works really well on epoxy and enamel.
This industrial cleaning chemical is mostly made up of solvents that strip the parts to be cleaned. There is also a built- in water seal which prevents unnecessary evaporation. This process should be done in a well ventilated area and full safety gear should be worn. Ideally, the part should be dipped into this cleaning chemical for about 30-60 minutes. It is best to use some type of hoist to lower the object to be cleaned into the chemical. This should be more than enough time to remove all the grease and grime. The item to be cleaned is then removed and rinsed clean with water.
Please be sure that when the time comes to replace this machine cleaning chemical with a fresh one that the chemical is disposed of responsibly. A waste disposal company should be hired for this purpose to ensure that the chemical, which can be hazardous to the environment, does not cause any harm. This cleaning product can be sometimes be boosted to allow it to be used even more often rather than replaced.
Blendwell Chemicals manufactures Black Turbo and a large range of industrial heavy duty degreasers.
To find out more about our range of workshop cleaning chemicals please contact us.
Blendwell Chemicals has a factory in Midrand, South Africa. We are your local cleaning chemical supplier.
