Industrial Cleaning - Soak Tank Cleaners

Cleaning in an industrial environment can be a very complicated process. First, you will need to assess the level of dirt, grease and grime you need to clean. Typically, in an industrial environment like a factory or workshop there is an excessive amount of grease and oil to deal with. Parts will regularly need to be cleaned before they can be worked on or refitted to engines.

There are two ways to do soak tank cleaning. You can use a solvent based chemical or you can use a water-based chemical.

A solvent based cleaning chemical is expensive to purchase in the first place however it’s running costs are dramatically less and can save you money in the long term. If correctly stored and used the cleaning chemical could last as long as five years. This cleaning chemical can evaporate so it needs to be properly covered and sealed when not in use.  Blendwell Chemicals has made all of their solvent soak tank cleaners to have a water layer on top to help prevent evaporation. This water layer acts as a water seal.

A water-based soak tank cleaner is not expensive to buy but costs a lot to use. It would need to be heated to 70 degrees Celsius and that alone can take 3 hours. The temperature must be maintained for as long as parts are soaking which could be up to 2 hours. Realistically you would be looking at about 5 hours of electrical heating which with rising electricity costs can become really expensive very fast.

Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals for more information on soak tank cleaners and all the other industrial cleaning chemicals in our huge range. All our chemical products are manufactured at our factory between Johannesburg and Pretoria near the Midrand Gautrain station. We are your local cleaning chemical supplier!

Industrial Cleaning - Engine Cleaning - Maxikleen

When cleaning engines, there are times when you are going to need some extra cleaning power. Even with the toughest grease and grime you can still use a water-based degreaser for this job.

Blendwell Chemicals manufactures a cleaning chemical called Maxikleen. As the name suggests this cleaning chemical gives you a maximum clean. Maxikleen is a very powerful cleaning chemical that is still a water-based degreaser. Maxikleen complies well above all SABS 1344 requirements.

When using this cleaning chemical to clean engines you would do best to mix this product at a dilution of 1:10. So to mix a 5 litre solution you will need to mix 500ml of Maxikleen to 4,5 litres of water and you’re ready to go with cleaning that engine.

Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals for more information on this cleaning chemical and all the other industrial cleaning chemicals that we manufacture for our factory in Johannesburg, South Africa. Blendwell Chemicals is your local cleaning chemical manufacturer!

Industrial Cleaning - Engine Cleaning - Electrical Cleaner

When cleaning machine and engine parts selecting the right type of cleaning chemical is really important. In instances where cleaning of fine machine parts is required you may want to consider using Blendwell Chemicals Electrical Cleaner.

This cleaning chemical is a solvent blend that is ideal for use where you may have some electrical parts. It can be used in areas where water cannot be tolerated. Due to the strong blend of solvents in this cleaning product, it should always be used in areas that are well-ventilated and if used for long periods consider using breathing apparatus.

It is best to spray or brush on this cleaning chemical and it has been designed to simply evapourate when cleaning is done.

Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals for more information on this and other cleaning chemicals. The Blendwell Chemicals factory can be found in Midrand, South Africa and we are your local cleaning chemical manufacturer!

How to clean your fridge

Giving the inside of your fridge a good scrub down once in a while is really necessary. Every now and again something that should have been thrown out ages ago gets forgotten in the back and begins to grow. This can quickly compromise the other food that you have in your fridge. 


If this has happened or if you are doing a routine clean it's a good idea to opt for a disinfectant cleaner. This will help kill any germs that remain after offensive foods have been removed. For this job, I recommend a cleaning product that Blendwell Chemicals manufactures for Delphis Eco called Anti-bacterial Sanitiser. Blendwell Chemicals manufactures the Delphis Eco range of cleaning chemicals under license to the UK. This incredibly effective anti-bacerial and anti-viral sanitser is certified to carry the SABS 1853 mark. You know that you can't go wrong with using this cleaning product as it is a fabulous disinfectant as well as being eco-friendly. 


To clean your fridge simply pour 50ml into a one litre spray bottle and fill up with water. As always wear regular household gloves. Remove food from your fridge and spray all surfaces. Leave on for a minute or two and then wipe off with a clean soft cloth. Make sure you pay extra attention to any areas where food is left behind. You can leave the sprayed area for a little longer and then wipe away.  


For more information on this and all the other cleaning chemicals that are manufactured by Blendwell Chemicals please visit www.blendwell.co.za. Blendwell Chemicals manufactures a huge range of cleaning chemicals from their factory in Midrand, South Africa.

Industrial Cleaning - Engine Cleaning - RTU

When cleaning engines you will need to decide on what type of chemical product you will need to use. Choosing between a solvent cleaner or a water-based cleaner will be decided upon depending on what level of grease you are dealing with and how sensitive is the environment you are cleaning in.

If you have chosen a solvent cleaner then you may want to consider a cleaning chemical like Blendwell Chemicals RTU. RTU is a ready to use solvent degreaser. You will not need to dilute this product before use. RTU is solvent based and has added emulsifiers and degreasers. This cleaning chemical has exceptional grease cutting power and does not leave any residue behind. RTU is best used when brushed onto the surface to be cleaned or you can also use a spray gun. Leave the chemical on the surface undisturbed for 10 minutes and then wash off with excess water.

Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals for more information on this and other industrial cleaning products manufactured by Blendwell Chemicals. We have a factory in Johannesburg South Africa and we are your local cleaning chemical supplier! 

Industrial Cleaning - Engine Cleaning

When cleaning engines, there are a few different ways you can approach this cleaning job. 

This is generally a huge task and to choose the right method for you is important.

If you have a high pressure cleaner you can use it for cleaning or alternatively if you do not you may want to brush or spray the chemical onto the surfaces to be cleaned.

You could also use a dip tank as we will discuss in detail later (this can also be called a soak tank cleaner). Your final option would then be a parts cleaner (also sometimes called a bupi machine).

When it comes to the cleaning chemical you would want to use you then have the option of solvent – based or water – based.  Typically a solvent works better and faster. The problem is when you have cleaned the engine and rinse off the used cleaning chemical then runs into the drain and ultimately into watercourses. A solvent has a much greater negative impact on the environment than a water-based degreaser.

One more thing to watch out for is if you have chosen a solvent degreaser, make sure that it is a mixture of degreaser and detergent. When the product is rinsed off, the cleaning chemical will go with it. This means that there will be no residue left behind. This residue can be a huge attractor of dirt if left in place.

Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals for more information on the huge range of cleaning chemicals that we manufacture. You will be able to find our factory in Midrand, South Africa. We are your local cleaning chemical supplier!

Industrial Cleaning - Hand Cleaning - Part 4

Hand cleaning when working in a workshop or other industrial environment can be a huge headache. Ordinary soap and water will not be able to get through all the grease and grime the skin gets exposed to and aggressive scrubbing can be painful.

Blendwell Chemicals has created a hand cleaner that can help. Bead Hand Cleaner is a new type of gel hand cleaner. Some people find that a grit hand cleaner is harsh on their skin. These new poly beads are much gentler and are still very effective at removing ingrained dirt. The hand cleaner itself has also been upgraded and now contains coconut derivatives and lanolin for extra skin conditioning. Another advantage of this hand cleaner is that the beads float in water. When rinsing the product off your hands the drains will not get clogged with beads as they float away with the water.

Blendwell Chemicals manufactures a huge range of cleaning chemicals from their factory in Johannesburg, South Africa. Please visit www.blendwell.co.za/Industrial_Cleaning_Chemicals for more information. We are your local cleaning chemical manufacturer!